Use bifurcated rivets to hold fixings to back of frame. e.g. Attach D-rings via a hole in back of hardboard and open out and flatten to provide a flush finish.

Unit: Each

Fix to back of frame with screws or to hardboard with bifurcated rivets. Suggested Screws: 3/8" x 4 or 1/2" x 4 Steel Round Head or 3/8" x 11 Bifurcated Rivets.

Unit: Each

D-Rings with two holes for extra strength. Suggested Screws: 1/2" x 4 Steel Round Head or 3/8" x 11 Bifurcated Rivets.

Unit: Box 100

Pair or Brass Fire Screen feet. Suggested Screws: 5/8" x 6 Brass Countersunk.

Unit: Pair

Fire Screen Handle. Suggested Screws: 5/8” x 5 Brass Countersunk.

Unit: Each

Brass swing fittings in pairs. Fix near the bottom of the frame with screws to hold strutback in place then open as as when required to replace images. Ideal for photo frames.

Unit: 10 Pairs

Use Glass Plates (also known as Picture Plates) to fix pictures permanently to walls. Suggested Screws: 3/4" Plates - 3/8" x 2 Brass Countersunk or 1" Plates 3/8" x 3 Brass Countersunk.

Unit: Box 500

Hard wall hooks are made especially for walls made of concrete and hard bricks and leave little marking.

Unit: Box 100

White nylon cord for hanging pictures.

Unit: Each

Traditional hooks supplied with picture pins.

Unit: Each

Hardened Picture Pins with knurled Brass Head.

Unit: Box 100

Brass Picture Wire.

Unit: Each

Picture 'X' Hook Cartons contain 12 small cardboard boxes for re-sale/counter display. Each box is packed with brass head picture pins (excludes Hardwall Hooks).

Unit: Each

Slot clip through hole in backing board then open out and flatten. For smaller pictures.

Unit: Box 1000

Simply screw the eye into the back of the frame.

Unit: Each

Screw eyes with split rings attached.

Unit: Box 200

Brass Countersunk, Steel Countersunk and Steel Roundhead Screws.

See “Guide to Screws & Pins for Fittings” for help with selection.

Unit: Each

Spring Clips apply pressure to hold a back or a canvas into a frame and may be easily turned for removal of the artwork. Suggested Screws: 1¾” Clips - 3/8" x 3 Steel Round Head (special order).

Unit: Box 200

Clip over backing board edges before fitting into a frame. Cover with backing tape and thread picture cord through slits for a neat finish. Two sizes to fit 2mm or 3mm backing board.

Unit: Each

Use to permanently fit canvasses into a frame to allow for movement. Tap one end into the rebate of the moulding, bend them back and drop into the canvas. Fold forward and tap into the stretcher bar. Coppered steel.

Unit: Each